SUMMARY
MLSS/Sludge Level Meter
For industrial waste water, human waste treatment facilities.
FEATURES
SPECIFICATIONS
| Model Name | MLSS/Sludge Level Meter : SS-10Z (with Water Depth Measuring Function) |
|---|---|
| Measurement | Activated Sludge Density, Zone Surface (Water Depth) of Sediment Tank and Sludge Density |
| Measuring Method |
MLSS : Near-Infrared Pulse Transmission light System Sludge Level (Water Depth): Semiconductor Temperature Sensor System |
| Measuring Range |
MLSS: 0 E0000mg/i (max.30000mg/f display) Sludge Level: 0-5m(max. 10m display with prolonged cable) |
| Resolution |
MLSS: 10mg/f (within 0-10000mg/E ) 100mg/t (within 10000-30000mg/t ) Sludge Level: 0.01m |
| Accuracy |
MLSS: within ±3%(FS) under certain conditions Sludge Level: within ±3%(FS) under certain conditions |
| Display |
Liquid Crystal Display MLSS: LCD 4 digits(upper) Memory: LCD 2 digits Sludge Level: LCD 4 digits(lower) |
| Mode |
Select one of 6 Modes. Example 1) Food and dairy Sludge Mode A. 2) Food and dairy Sludge Mode B. 3) Sewage disposal/combine Septic Tank Sludge Mode. 4) Human Waste Disposal Sludge Mode. 5) Deposit Tank concentrated Sludge Mode A. 6) Deposit Tank concentrated Sludge Mode B. |
| Zone Surface Measurement |
"ALM", "mg/f" blinks over 15000 mg/f. Water depth display at "ALM", "mg/f" blinking shows sludge zone surface. |
| Calibration Method |
MLSS: 1) One-point Calibration (zero calibration only) 2) Tow-point Calibration (Zero and Span Calibration) +Span Calibration should be done by Sludge of known Density. 3) 3-4 point Calibration (Zero, Span and Middle-Point Calibration) +Span calibration should be done by Sludge of known Density, and Middle-Point Calibration by diluted Sludge Water Depth : Auto Zero Calibration at the time of throwing Power Source. |
| Self diagnosis | Battery Voltage, Detector, Disorder Calibration Disorder, Scale Over |
| Memory | Max. 30 data |
| Structure |
Dust-Proofed, Water-Proofed, corresponding to IP67 (under the condition of Connector Plug and the Meter correctly connected) |
| Power Source | DC4.5V(LRO3 x 3) Auto power off after 30 Minutes. |
| Dimensions | 70(W) x 170(D) x 36(H)mm |
| Weight | Approx. 290g |
??Because of product improvement, these specifications may be changed without notice.
Detector Specifications
| Model Name | MLSS/Sludge Level Detector : SSD-10Z(with Pressure Sensor) |
|---|---|
| Cable length | 6m Standard(possible max. 11m) |
| Dimensions | ρE0 x 214 |
| Weight | Approx. 800g |
| Materials | ABS, SUS304 |
| Unable to test | Sample with organic Solvent, strong Acid Sample, Sample with strong Oxidizer |